#ifndef DISPLAY_RGB_H
#define DISPLAY_RGB_H

#include <stdbool.h>
#include "esp_err.h"
#include "esp_lcd_panel_ops.h"
#include "lvgl.h"

#define DISPLAY_H_RES 800
#define DISPLAY_V_RES 480

/*
 * Two-phase bring-up, and the order is load-bearing:
 *
 *   display_alloc()  -- BEFORE wifi_init_sta(). Grabs the framebuffers and
 *                       the two contiguous bounce buffers while the internal
 *                       heap is still unfragmented; WiFi's RX buffer churn
 *                       destroys the needed contiguity within seconds.
 *                       The panel is not scanning after this.
 *   display_start()  -- AFTER WiFi (all flash writes done) and after
 *                       lvgl_port_init(). Starts scan-out and registers the
 *                       display with LVGL.
 *
 * Backlight is NOT owned here on the Advance; see drivers/backlight.
 */
esp_err_t display_alloc(void);
esp_err_t display_start(void);

lv_display_t *display_get_default(void);

/* Underlying esp_lcd panel, for drawing that bypasses LVGL. */
esp_lcd_panel_handle_t display_get_panel(void);

#endif