Files
rotaryThermo/main
mattandClaude Opus 5 4c7b120473 Fix TWDT starvation, vsync race, and UI responsiveness from review
Three bugs and two UX defects found on review, plus hardening:

- The control loop fed the task watchdog then slept exactly the watchdog
  period (both 10s), tripping the TWDT fractionally late on every single
  iteration. Sleep is now sliced 1s with a reset per slice. Also set
  CONFIG_ESP_TASK_WDT_PANIC=y - the sdkconfig comment claimed a hung task
  panics the chip, but nothing actually made that true.

- The LVGL flush called draw_bitmap (which only queues the framebuffer
  switch) and released LVGL immediately, letting it render the next frame
  into the buffer still being scanned out - the exact PRD 8.2 race the
  double-buffer design exists to prevent. display_present_frame() now
  blocks on a vsync handshake until the swap has latched.

- WiFi reconnect slept up to 30s inside the system event handler, stalling
  all queued WiFi/IP events. Moved to an esp_timer.

- The setpoint label, arc, and mode/room lines rendered the control loop's
  copy of state, which refreshes every 10s - every knob detent looked dead
  for up to 10 seconds. The UI now reads settings live; when the fallback
  ladder clamps the setpoint it shows both values. Room-select focus now
  shows which room is being selected.

- z2m ISO_8601_local timestamps carry a UTC offset the parser ignored,
  which would shift apparent reading age by the local offset (5-6h in the
  US) and permanently trip the fallback ladder. Offset is now honoured.

- Suppressed the cosmetic "control loop stopped" fault in the window
  between relay_init and the control task's first call-in at boot.

- Explicit pullups on the encoder A/B lines.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-03 20:05:51 -07:00
..